Showing posts with label decorating easy. Show all posts
Showing posts with label decorating easy. Show all posts

Wednesday, June 5, 2013

Make a Photo Cube

 
Finished Photo Cube by Fuego Phoenix

This idea taken from the book, Decorating with Papercraft, by Clare Youngs.
I modified the idea, by adding color photographs, and decorative borders. You may
opt for a "no frills" look, keeping it simple with only photos.


Adding gold cardstock to the bottom

Copyright c. 2013 Fuego Phoenix All Rights Reserved

Trim I used called fancy frills cardboard stickers by doodlebug design, inc.


Here's what you need:

5 photographs of your family, child or favorite pet
1 sheet of cardstock or watercolor paper at least 16 inches by 12 inches
utility knife
glue stick, Elmer's glue, or Mod Podge glue
ruler
pen
masking tape or scotch tape
1 sheet of decorative paper or gold cardstock
optional: fancy cardstock stickers for framing, found at Hobby Lobby in the scrapbook section


Enlarge the template shown above to 400 percent, depending on the size of
your photos. (Our photos were 4 inches by 6 inches, so we made our cube with 4 inch by
4 inch dimensions. Cut out the template, and fold on the dotted lines

Score along dotted lines, then fold along the edges. Tape on the inside and outside
corners. Fold the top in place, and tape.

Add colored paper to what will be the bottom of your cube. Take a piece of paper,
crease it over the edges of the cube, then cut out. Glue into place, leaving enough
to go over the edges to the sides of the cube.

Take one of the photographs, center it over one of the sides of the cube. Trim
as needed. Place glue all over the side of the cube where the photo will go. Press
the photo lightly in place. Wipe off any excess glue with a cloth. Repeat this step
for the other sides, and top of the cube.

This step is optional.
To finish off the edges, where the photos didn't meet exactly,  I added trim
from fancy frills borders by doodlebug design, inc. These are a perfect detail
for the cube. They add a nice touch, and come in all colors.



.
Enlarge template 400 percent to accomodate 4 inch photos. Cut on the solid lines, fold on the dotted lines.





Buy Easy Crafts on a Budget for Kids 4 to 104 here:  http://www.amazon.com/Easy-Crafts-Budget-Kids-Volume/dp/0615640826





Saturday, May 11, 2013

Candle Holders out of Furniture Legs

Here's an idea for a do it yourself decorating project, diy crafts, or
a handmade gift idea.

I was at the local upholstery store, the other day, when I

noticed a box full of wooden furniture legs. Some were chunky wooden
ones, like you see on contemporary couches and modern chairs, others
are taller and more rounded. I liked the look of the chunky ones,
which are slightly larger at the top (approximately 5 inches square)
than the bottom of the leg, which is about 4 inches square, and stand
about 4 to 5 inches tall. I purchased a couple of these.
 
When I arrived home, I decided to use some mirrors
I've been saving, which are about a quarter inch square, combined
with some metal washers I've been wanting to use.The washers
are square with a hole in the middle for tiny screws.

I lay the mirrors and metal washers on top of one leg, to make
sure they'd fit. I scooted them onto a piece of cardboard,
and put glue along one side of the leg about 1/2 inch wide. I added
the washer first, then a mirror tile, then a washer, until the row
was complete. I repeated this process of adding glue, then
alternating the mirrors and washers, so that they form a checkerboard
pattern. I used tweasers to push them mirrors into place. The mirrors tend
to move around on the glue.

Once I had all the pieces glued, I allowed the glue to set overnight.
The next morning I washed off any excess glue that was on the
mirrors. I bought a small candle, lit it and place it on its new
setting. I'm very pleased with the finished product. This project
is both easy and affordable. I like the look of the shiny mirrors
mixed with the used washers. If you want, you can put
a candle holder jar on top of the wooden leg, for a cool look!

If you don't have access to an upholstery supply store, that
carries furniture legs, you can use a chunky piece of scrap wood,
perhaps from your local carpenter? Just stain or paint the wood,
and add mirrors and metal washers on top. This project
makes home decorating easy.


 

Simple Furniture Leg

Copyright C. 2013 Fuego Phoenix All Rights Reserved 

Add mirrors and metal washers.




Copyright c. 2013 Fuego Phoenix All Rights Reserved

A unique candle holder.



Buy Easy Crafts on a Budget for Kids 4 to 104 here: http://www.amazon.com/Easy-Crafts-Budget-Kids-Volume/dp/0615640826